Allied Telesis AT-S95 CLI - Manual (Page 222)

Page 210
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Syntax
spanning-tree hello-time seconds
no spanning-tree hello-time
Parameters
•
seconds — Time in seconds. (Range: 1 - 10)
Default Configuration
The default hello time for IEEE Spanning Tree Protocol (STP) is 2 seconds.
Command Modes
Global Configuration mode
User Guidelines
When configuring the hello time, the following relationship should be kept:
Max-Age >= 2*(Hello-Time + 1)
Example
The following example configures spanning tree bridge hello time to 5 seconds.
spanning-tree max-age
The spanning-tree max-age Global Configuration mode command configures the spanning tree bridge maximum
age. Use the no form of this command to return to the default configuration.
Syntax
spanning-tree max-age seconds
no spanning-tree max-age
Parameters
•
seconds — Time in seconds. (Range: 6 - 40)
Default Configuration
The default maximum age for IEEE Spanning Tree Protocol (STP) is 20 seconds.
Command Modes
Global Configuration mode
User Guidelines
When configuring the maximum age, the following relationships should be kept:
2*(Forward-Time - 1) >= Max-Age
Max-Age >= 2*(Hello-Time + 1)
Console(config)# spanning-tree hello-time 5