Allied Telesis AT-S95 CLI - Manual (Page 68)

Page 56
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Example
The following example defines the authentication key for SNTP.
sntp authenticate
The sntp authenticate Global Configuration mode command grants authentication for received Simple Network
Time Protocol (SNTP) traffic from servers. Use the no form of this command to disable the feature.
Syntax
sntp authenticate
no sntp authenticate
Default Configuration
No authentication
Command Mode
Global Configuration mode
User Guidelines
The command is relevant for both Unicast and Broadcast.
Example
The following example defines the authentication key for SNTP and grants authentication.
sntp trusted-key
The sntp trusted-key Global Configuration mode command authenticates the identity of a system to which
Simple Network Time Protocol (SNTP) will synchronize. Use the no form of this command to disable
authentication of the identity of the system.
Syntax
sntp trusted-key key-number
no sntp trusted-key key-number
Parameters
•
key-number — Key number of authentication key to be trusted. (Range: 1 - 4294967295)
Default Configuration
No keys are trusted.
Console(config)# sntp authentication-key 8 md5 ClkKey
Console(config)# sntp authentication-key 8 md5 ClkKey
Console(config)# sntp trusted-key 8
Console(config)# sntp authenticate