Allied Telesis AT-S95 CLI - Manual (Page 254)

Page 242
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Example
The following example displays the SSH server configuration.
The following table describes significant fields shown above:
show crypto key mypubkey
The show crypto key mypubkey Privileged EXEC mode command displays the SSH public keys on the device.
Syntax
show crypto key mypubkey [rsa | dsa]
Parameters
•
rsa — Indicates the RSA key.
• dsa — Indicates the DSA key.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Console# show ip ssh
SSH server enabled. Port: 22
RSA key was generated.
DSA (DSS) key was generated.
SSH Public Key Authentication is enabled.
Active incoming sessions:
IP address
SSH username Version Cipher Auth Code
---------- ------------ --------- ------- ----------
172.16.0.1 John Brown 2.0 3 DES HMAC-SHA1
Field Description
IP address Client address
SSH username User name
Version SSH version number
Cipher Encryption type (3DES, Blowfish, RC4)
Auth Code Authentication Code (HMAC-MD5, HMAC-SHA1)