Allied Telesis AT-S95 CLI - Manual (Page 342)

Page 330
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
The following example displays 802.1X advanced features for the switch.
dot1x guest-vlan enable
The dot1x guest-vlan enable Interface Configuration mode command enables unauthorized users on the
interface access to the Guest VLAN. Use the no form of this command to disable access.
Syntax
dot1x guest-vlan enable
no dot1x guest-vlan enable
Console# show dot1x advanced
Guest VLAN: 3978
Unauthenticated VLANs: 91,92
Interface Multiple Hosts Guest VLAN MAC Authentication
--------- -------------- ---------- ----------
1/1 Disabled Enabled MAC-and-802.1X
1/2 Enabled Disabled Disabled
Console# show dot1x advanced ethernet 1/1
Guest VLAN: 2
Unauthenticated VLANs: 91,92
Interface Multiple Hosts Guest VLAN MAC Authentication
--------- -------------- ---------- ----------
1/1 Disabled Enabled MAC-and-802.1X
1/2 Enabled Disabled Disabled
Single host parameters
Violation action: Discard
Trap: Enabled
Trap frequency: 100
Status: Single-host locked
Violations since last trap: 9