Allied Telesis AT-S95 CLI - Manual (Page 317)

Web Server Commands
Page 305
Command Mode
Global Configuration mode
User Guidelines
Use the crypto certificate generate Global Configuration mode command to generate an HTTPS certificate.
Example
The following example enables configuring the device from a secured browser.
ip https port
The ip https port Global Configuration mode command specifies the TCP port used by the server to configure the
device through the Web browser. Use the no form of this command to return to the default configuration.
Syntax
ip https port port-number
no ip https port
Parameters
•
port-number — Port number to be used by the HTTP server. (Range: 1 - 65535)
Default Configuration
The default port number is 443.
Command Mode
Global Configuration mode
User Guidelines
Specifying 0 as the port number effectively disables HTTP access to the device.
Example
The following example configures the https port number to 100.
ip https exec-timeout
iThe ip https exec-timeout Global Configuration mode command sets the interval for the system wait for user
input in https sessions, before automatic logoff. Use the no form of this command to restore the default
configuration.
Syntax
ip https exec-timeout minutes [seconds]
no ip https exec-timeout
Console(config)# ip https server
Console(config)# ip https port 100