Allied Telesis AT-S95 CLI - Manual (Page 304)

Page 292
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the PVID for Ethernet port 1/g16, when the interface is in general mode.
switchport general ingress-filtering disable
The switchport general ingress-filtering disable Interface Configuration mode command disables the ingress
filtering of a port. Use the no form of this command to enable the ingress filtering of a port.
Syntax
switchport general ingress-filtering disable
no switchport general ingress-filtering disable
Parameters
•
This command has no keywords or arguments.
Default Configuration
Ingress filtering is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example disables the ingress filtering of a port.
switchport general acceptable-frame-type tagged-only
The switchport general acceptable-frame-type tagged-only Interface Configuration mode command discards
untagged frames at ingress. Use the no form of this command to return to the default configuration.
Syntax
switchport general acceptable-frame-type tagged-only
no switchport general acceptable-frame-type tagged-only
Default Configuration
All frame types are accepted at ingress.
Console(config)# interface ethernet 1/g16
Console(config-if)# switchport general pvid 234
Console(config)# switchport general ingress-filtering disable