Allied Telesis AT-S95 CLI - Manual (Page 115)

GVRP Commands
Page 103
Chapter 10.GVRP Commands
gvrp enable (Global)
GARP VLAN Registration Protocol (GVRP) is an industry-standard protocol designed to propagate VLAN
information from device to device. With GVRP, a single device is manually configured with all desired VLANs for
the network, and all other devices on the network learn these VLANs dynamically.
The gvrp enable Global Configuration mode command enables GVRP globally. Use the no form of this command
to disable GVRP on the device.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is globally disabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables GVRP globally on the device.
gvrp enable (Interface)
The gvrp enable Interface Configuration (Ethernet, port-channel) mode command enables GVRP on an interface.
Use the no form of this command to disable GVRP on an interface.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is disabled on all interfaces.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Console(config)# gvrp enable