Allied Telesis AT-S95 CLI - Manual (Page 79)

Configuration and Image File Commands
Page 67
To copy the running configuration file to a backup configuration file, enter the copy running-config file command.
To copy the startup configuration file to a backup configuration file, enter the copy startup-config file command.
Before copying from the backup configuration file to the running configuration file, make sure that the backup
configuration file has not been corrupted.
Example
The following example copies system image file1 from the TFTP server 172.16.101.101 to a non-active image file.
dir
The dir Privileged EXEC mode command displays the list of files on a flash file system.
Syntax
dir
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the list of files on a flash file system.
Console# copy tftp://172.16.101.101/file1 image
Accessing file 'file1' on 172.16.101.101...
Loading file1 from 172.16.101.101:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! [OK]
Copy took 0:01:11 [hh:mm:ss]
Console# dir
Directory of flash:
File Name Permission FlashSize DataSize Modified
---------- ---------- ---------- ---------- ----------
image-1 rw 5242880 4325376 01-Jan-2000 01:07:13
image-2 rw 5242880 4325376 01-Jan-2000 09:09:19
dhcpsn.prv -- 131072 --- 01-Jan-2000 01:02:15
sshkeys.prv -- 262144 --- 01-Jan-2000 01:02:15