Allied Telesis AT-S95 CLI - Manual (Page 277)

System Management Commands
Page 265
hostname
The hostname Global Configuration mode command specifies or modifies the device host name. Use the no form
of this command to remove the existing host name.
Syntax
hostname name
no hostname
Parameters
•
name — The host name. of the device. (Range: 1-158 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the device host name.
stack master
Note
This command is operational in the AT-S94/24, AT-S94/24POE, AT-S94/48 and AT-S94/48POE devices.
The stack master Global Configuration mode command enables forcing the selection of a stack master. Use the
no form of this command to return to the default configuration.
Syntax
stack master unit unit
no stack master
Parameters
•
unit— Unit number of the new master (Range: 1-2)
Default Configuration
Disables forcing the selection of a stack master.
Console(config)# hostname Marvell
Marvell(config)#