Allied Telesis AT-S95 CLI - Manual (Page 70)

Page 58
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Syntax
sntp broadcast client enable
no sntp broadcast client enable
Default Configuration
The SNTP Broadcast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp client enable (Interface) Interface Configuration mode command to enable the SNTP client on a
specific interface.
Example
The following example enables the SNTP Broadcast clients.
sntp anycast client enable
The sntp anycast client enable Global Configuration mode command enables SNTP Anycast client. Use the no
form of this command to disable the SNTP Anycast client.
Syntax
sntp anycast client enable
no sntp anycast client enable
Default Configuration
The SNTP Anycast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
The sntp client poll timer Global Configuration mode command determines polling time.
Use the sntp client enable (Interface) Interface Configuration mode command to enable the SNTP client on a
specific interface.
Example
The following example enables SNTP Anycast clients.
Console(config)# sntp broadcast client enable
console(config)# sntp anycast client enable