Allied Telesis AT-S95 CLI - Manual (Page 42)

Page 30
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
password
The password Line Configuration mode command specifies a password on a line. Use the no form of this
command to remove the password.
Syntax
password password [encrypted]
no password
Parameters
•
password — Password for this level (Range: 1-159 characters).
• encrypted — Encrypted password to be entered, copied from another device configuration.
Default Configuration
No password is defined.
Command Mode
Line Configuration mode
User Guidelines
If a password is defined as encrypted, the required password length is 32 characters.
Example
The following example specifies password secret on a console.
username
The username Global Configuration mode command creates a user account in the local database. Use the no
form of this command to remove a user name.
Line Login Method List Enable Method List
-------------- ----------------- ------------------
Console Console_Login Console_Enable
Telnet Default Default
SSH Default Default
http: Radius, Local
https: Radius, Local
dot1x: Radius
Console(config)# line console
Console(config-line)# password secret