Allied Telesis AT-S95 CLI - Manual (Page 242)

Page 230
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Console# show spanning-tree ethernet 1/g1
Port 1 (1/g1) enabled
State: Forwarding
Role: Root
Port id: 128.1 Port cost: 20000
Type: P2p (configured: auto) RSTP Port Fast: No (configured:no)
Designated bridge Priority: 32768 Address: 00:01:42:97:e0:00
Designated port id: 128.25 Designated path cost: 0
Number of transitions to forwarding state: 1
BPDU: sent 2, received 120638
Console# show spanning-tree mst-configuration
Name: Region1
Revision: 1
Instance
Vlans mapped State
-------- ------------ -------
0 1-9, 21-4094 Enabled
1 10-20 Enabled
Console# show spanning-tree
Spanning tree enabled mode MSTP
Default port cost method: long
###### MST 0 Vlans Mapped: 1-9,
CST Root ID
Priority 32768
Address 00:01:42:97:e0:00
Path Cost 20000
Root Port 1 (1/g1)
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
IST Master ID Priority 32768
Address 00:02:4b:29:7a:00
This switch is the IST master.
Hello Time 2 sec
Max Age 20 sec Forward Delay 15 sec
Max hops 20
Interfaces