Allied Telesis AT-S95 CLI - Manual (Page 312)

Page 300
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Example
The following example displays the switchport configuration for Ethernet port 1/g1.
Console# show interface switchport ethernet 1/g1
Port 1/g1:
VLAN Membership mode: General
Operating parameters:
PVID: 1 (default)
Ingress Filtering: Enabled
Acceptable Frame Type: All
GVRP status: Enabled
Protected: Enabled, Uplink is 1/g9.
Port 1/g1 is member in:
Vlan
Name Egress rule Type
---- ------- ----------- -------
1 default untagged System
8 VLAN008 tagged Dynamic
11 VLAN011 tagged Static
19 IPv6 VLAN untagged Static
72 VLAN0072 untagged Static
Static configuration:
PVID: 1 (default)
Ingress Filtering: Enabled
Acceptable Frame Type: All
Port 1/g1 is statically configured to:
Vlan
Name Egress rule
---- ------- -----------
1 default untagged
11 VLAN011 tagged
19 IPv6 VLAN untagged
72 VLAN0072 untagged
Forbidden VLANS:
VLAN
Name
---- ----