Allied Telesis AT-S95 CLI - Manual (Page 213)

SNMP Commands
Page 201
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables SNMP failed authentication traps.
snmp-server contact
The snmp-server contact Global Configuration mode command configures the system contact (sysContact)
string. Use the no form of this command to remove system contact information.
Syntax
snmp-server contact text
no snmp-server contact
Parameters
•
text — Specifies the string that describes system contact information. (Range: 0-160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Do not include spaces in the text string or place text that includes spaces inside quotation marks.
Example
The following example configures the system contact point called ATI_Technical_Support.
snmp-server location
The snmp-server location Global Configuration mode command configures the system location string. Use the
no form of this command to remove the location string.
Syntax
snmp-server location text
no snmp-server location
Console(config)# snmp-server trap authentication
console(config)# snmp-server contact ATI_Technical_Support