Allied Telesis AT-S95 CLI - Manual (Page 296)

Page 284
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
User Guidelines
There are no user guidelines for this command.
Example
The following example VLAN number 1972 is created.
default-vlan disable
The default-vlan disable VLAN Configuration mode command disables the default VLAN functionality. Use the
no form of this command to enable the default VLAN functionality.
Syntax
default-vlan disable
no default-vlan disable
Default Configuration
Enabled.
Command Mode
VLAN Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
default-vlan vlan
The default-vlan vlan VLAN Configuration mode command defines the default VLAN. Use the no form of this
command to return to default.
Syntax
default-vlan vlan vlan-id
no default-vlan vlan
Parameters
•
vlan-id — VLAN ID of the default VLAN
console(config)# vlan database
console(config-vlan)# vlan 1972
console(config-vlan)#
console(config)# default-vlan disable
console(default-vlan disable)#