Allied Telesis AT-S95 CLI - Manual (Page 252)

Page 240
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Parameters
•
username — Specifies the username of the remote SSH client. (Range: 1-48 characters)
• rsa — Indicates the RSA key pair.
• dsa — Indicates the DSA key pair.
Default Configuration
No SSH public keys exist.
Command Mode
SSH Public Key-string Configuration mode
User Guidelines
Follow this command with the key-string SSH Public Key-String Configuration mode command to specify the key.
Example
The following example enables manually configuring an SSH public key for SSH public key-chain bob.
key-string
The key-string SSH Public Key-string Configuration mode command manually specifies an SSH public key.
Syntax
key-string
key-string row key-string
Parameters
•
row — Indicates the SSH public key row by row.
• key-string—Specifies the key in UU-encoded DER format; UU-encoded DER format is the same format in the
authorized_keys file used by OpenSSH.
Default Configuration
No keys exist.
Command Mode
SSH Public Key-string Configuration mode
User Guidelines
Use the key-string SSH Public Key-string Configuration mode command to specify which SSH public key is to be
interactively configured next. To complete the command, you must enter a row with no characters.
Console(config)# crypto key pubkey-chain ssh
Console(config-pubkey-chain)# user-key bob rsa
Console(config-pubkey-key)# key-string row
AAAAB3NzaC1yc2EAAAADAQABAAABAQCvTnRwPWl