Allied Telesis AT-S95 CLI - Manual (Page 216)

Page 204
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
The following table describes significant fields shown above.
show snmp engineid
The show snmp engineID Privileged EXEC mode command displays the ID of the local Simple Network
Management Protocol (SNMP) engine.
Syntax
show snmp engineID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SNMP engine ID.
Version 3 notifications
Target Address
Type Username Security
Level UDP
Port Filter
Name TO
Sec Retries
-------------- ----- --------- ------- ---- ------ --- -------
192.122.173.42 Inform Bob Priv 162 15 3
System Contact: Robert
System Location: Marketing
Field Description
Community-string Community access string to permit access to the SNMP protocol.
Community-access Type of access - read-only, read-write, super access
IP Address Management station IP Address.
Trap-Rec-Address Targeted Recipient
Trap-Rec-Community Statistics sent with the notification operation.
Version SNMP version for the sent trap 1 or 2.
Console# show snmp engineID
Local SNMP engineID: 08009009020C0B099C075878