Allied Telesis AT-S95 CLI - Manual (Page 140)

Page 128
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Syntax
ip host name address
no ip host name
Parameters
•
name — Specifies the name of the host. (Range: 1-158 characters)
• address — Specifies the associated IP address.
Default Configuration
No host is defined.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
To define an out-of-band address, use the out-of-band IP address format: oob/ip-address.
Example
The following example defines a static host name-to-address mapping in the host cache.
clear host
The clear host Privileged EXEC mode command deletes entries from the host name-to-address cache.
Syntax
clear host {name | *}
Parameters
•
name — Specifies the host entry to be removed. (Range: 1-158 characters
)
• * — Removes all entries.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Console(config)# ip host accounting.website.com 176.10.23.1