Allied Telesis AT-S95 CLI - Manual (Page 34)

Page 22
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
show access-lists
The show access-lists Privileged EXEC mode command displays Access Control Lists (ACLs) configured on the
switch.
Syntax
show access-lists [name]
Parameters
•
name — Name of the ACL.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays access lists.
show interfaces access-lists
The show interfaces access-lists Privileged EXEC mode command displays access lists applied on interfaces.
Syntax
show interfaces access-lists [ ethernet interface | vlan vlan-id | port-channel port-channel-number ]
Parameters
•
vlan-id— Specifies the ID of the VLAN.
• interface — The full syntax is: unit/port.
• port-channel-number — Valid port-channel Index.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Console# show access-lists
IP access list ACL1
permit ip host 172.30.40.1 any
permit rsvp host 172.30.8.8 any