Allied Telesis AT-S95 CLI - Manual (Page 107)

Ethernet Configuration Commands
Page 95
show ports jumbo-frame
The show port jumbo-frame Privileged EXEC mode command displays the configuration of jumbo frames.
Syntax
show port jumbo-frame
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables the display of the configuration of jumbo frames.
show interfaces counters
The show interfaces counters User EXEC mode command displays traffic seen by the physical interface.
Syntax
show interfaces counters [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — A valid Ethernet port. (Full syntax: unit/port)
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Console# show port jumbo-frame
Jumbo frames are disabled
Jumbo frames will be enabled after reset