Allied Telesis AT-S95 CLI - Manual (Page 82)

Page 70
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Example
The following example displays the contents of the running configuration file.
show startup-config
The show startup-config Privileged EXEC mode command displays the contents of the startup configuration file.
Syntax
show startup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the contents of the running configuration file.
Console# show running-config
software version 1.1
hostname device
interface ethernet 1/g1
ip address 176.242.100.100 255.255.255.0
duplex full
speed 1000
interface ethernet 1/g2
ip address 176.243.100.100 255.255.255.0
duplex full
speed 1000
Console# show startup-config
software version 1.1
hostname device