Allied Telesis AT-S95 CLI - Manual (Page 236)

Page 224
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
abort (mst)
The abort MST Configuration mode command exits the MST configuration mode without applying the
configuration changes.
Syntax
abort
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example exits the MST configuration mode without saving changes.
show spanning-tree
The show spanning-tree Privileged EXEC mode command shows spanning tree configuration.
Syntax
show spanning-tree [ethernet interface -number| port-channel port-channel-number] [instance instance-id]
show spanning-tree [detail] [active | blockedports] [instance instance-id]
show spanning-tree mst-configuration
Parameters
•
detail —Display detailed information.
• active — Display active ports only.
• blockedports — Display blocked ports only.
• mst-configuration — Display the MST configuration identifier.
• interface-number — Ethernet port number.
• port-channel-number — Port channel index.
• instance-id — ID associated with a spanning-tree instance.
Default Configuration
This command has no default configuration.
Console(config) # spanning-tree mst configuration
Console(config-mst) # abort