Allied Telesis AT-S95 CLI - Manual (Page 104)

Page 92
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Parameters
•
interface — Valid Ethernet port. (Full syntax: unit/port)
• port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of all configured interfaces:
Console# show interfaces configuration
Port Type Duplex Speed Neg Flow
Ctrl Link
State Back
Pressure Mdix
Mode
---- ----------- ------ ----- ------- ---- ----- -------- ----
1/g1 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g2 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g3 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g4 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g5 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g6 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g7 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g8 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g9 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g10 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g11 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g12 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g13 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g14 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g15 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g16 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g17 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g18 1G-Copper Full 100 Enabled Off Up Disabled Auto
1/g19 1G-Copper Full 100 Enabled Off Up Disabled Auto