Allied Telesis AT-S95 CLI - Manual (Page 166)

Page 154
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Parameters
•
port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information on all port-channels.
Console# show interfaces port-channel
Channel Ports
------- ---------------------------------
1 Active: 1/g1, 2/g2
2 Active: 2/g2, 2/g7 Inactive: 3/g1
3 Active: 3/g3, 3/g8