Allied Telesis AT-S95 CLI - Manual (Page 188)

Page 176
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the deadtime to 10 minutes.
show radius-servers
The show radius-servers Privileged EXEC mode command displays the RADIUS server settings.
Syntax
show radius-servers
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays RADIUS server settings.
Console(config)# radius-server deadtime 10
Console# show radius-servers
IP address Port
Auth TimeOut Retransmit DeadTime Source IP Priority Usage
--------- ---- ------- ---------- ------ -------- -------- -----
172.16.1.1 1645 Global Global Global - 1 All
172.16.1.2 1645 11 8 Global Global 2 All
Global values
-------------
TimeOut: 3
Retransmit: 3
Deadtime: 0
Source IP: 172.16.8.1