Allied Telesis AT-S95 CLI - Manual (Page 305)

VLAN Commands
Page 293
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures Ethernet port 1/g16 to discard untagged frames at ingress.
switchport general acceptable-frame-type tagged-only
The switchport general acceptable-frame-type tagged-only Interface Configuration mode command discards
untagged frames at ingress. Use the no form of this command to return to the default configuration.
Syntax
switchport general acceptable-frame-type tagged-only
no switchport general acceptable-frame-type tagged-only
Default Configuration
All frame types are accepted at ingress.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures Ethernet port 1/g16 to discard untagged frames at ingress.
switchport general map macs-group vlan
The switchport general map macs-group vlan interface configuration mode command sets a mac-based
classification rule. Use the no form of this command to delete a classification.
Syntax
switchport general map macs-group group vlan vlan-id
no switchport general map macs-group group
Console(config)# interface ethernet 1/g16
Console(config-if)# switchport general acceptable-frame-type tagged-only
Console(config)# interface ethernet 1/g16
Console(config-if)# switchport general acceptable-frame-type tagged-only