Allied Telesis AT-S95 CLI - Manual (Page 74)

Page 62
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
Example
The following example displays the time and date from the system clock.
show sntp configuration
The show sntp configuration Privileged EXEC mode command shows the configuration of the Simple Network
Time Protocol (SNTP).
Syntax
show sntp configuration
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the current SNTP configuration of the device.
Console> show clock
15:29:03 PDT(UTC-7) Jun 17 2002
Time source is SNTP
Console> show clock detail
15:29:03 PDT(UTC-7) Jun 17 2002
Time source is SNTP
Time zone:
Acronym is PST
Offset is UTC-8
Summertime:
Acronym is PDT
Recurring every year.
Begins at first Sunday of April at 2:00.
Ends at last Sunday of October at 2:00.
Offset is 60 minutes.
Console# show sntp configuration
Polling interval: 7200 seconds
MD5 Authentication keys: 8, 9