Allied Telesis AT-S95 CLI - Manual (Page 235)

Spanning-Tree Commands
Page 223
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
The pending MST region configuration takes effect only after entering the MST configuration mode.
Example
The following example displays a pending MST region configuration.
exit (mst)
The exit MST Configuration mode command exits the MST configuration mode and applies all configuration
changes.
Syntax
exit
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example exits the MST configuration mode and saves changes.
Console(config-mst)# show pending
Pending MST configuration
Name: Region1
Revision: 1
Instance
Vlans Mapped State
-------- ------------ -------
0 1-9,21-4094 Enabled
1 10-20 Enabled
Console(config) # spanning-tree mst configuration
Console(config-mst) # exit