Allied Telesis AT-S95 CLI - Manual (Page 234)

Page 222
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface User’s Guide
User Guidelines
There are no user guidelines for this command.
Example
The following example defines the configuration name as region1.
revision (mst)
The revision MST configuration command defines the configuration revision number. Use the no form of this
command to return to the default configuration.
Syntax
revision value
no revision
Parameters
•
value—Configuration revision number (Range: 0-65535).
Default Configuration
The default configuration revision number is 0.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the configuration revision to 1.
show (mst)
The show MST Configuration mode command displays the current or pending MST region configuration.
Syntax
show {current | pending}
Parameters
•
current—Indicates the current region configuration.
• pending—Indicates the pending region configuration.
Console(config) # spanning-tree mst configuration
Console(config-mst) # name region 1
Console(config) # spanning-tree mst configuration
Console(config-mst) # revision 1