Allied Telesis AT-S95 CLI - Manual (Page 39)

AAA Commands
Page 27
enable authentication
The enable authentication Line Configuration mode command specifies the authentication method list when
accessing a higher privilege level from a remote telnet or console. Use the no form of this command to return to
the default configuration specified by the aaa authentication enable command.
Syntax
enable authentication {default | list-name}
no enable authentication
Parameters
•
default — Uses the default list created with the aaa authentication enable command.
• list-name — Uses the indicated list created with the aaa authentication enable command.
Default Configuration
Uses the default set with the aaa authentication enable command.
Command Mode
Line Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the default authentication method when accessing a higher privilege level from a
console.
ip http authentication
The ip http authentication Global Configuration mode command specifies authentication methods for HTTP
server users. Use the no form of this command to return to the default configuration.
Syntax
ip http authentication method1 [method2...]
no ip http authentication
Parameters
•
method1 [method2...] — Specify at least one from the following table:
Console(config)# line console
Console(config-line)# enable authentication default
Keyword Description
local Uses the local username database for authentication.
none Uses no authentication.