HP XP Command View Advanced Edition Software - Manual (Page 83)

Command line interface commands
83
Table 4-22 DeleteHostStorageDomain command parameters
Parameter Name Status Description
domain Optional The domain ID of the host storage domain to be deleted
This parameter can be specified in decimal and hexadecimal. If you
specify a hexadecimal number, add the 0x prefix.
NOTE: The execution results are output in decimal.
NOTE: Do not specify 0. You cannot delete host domain 0.
NOTE: You must specify either domain or domainnickname. Do not
specify both parameters at the same time, as this might cause an error to
occur.
domainnickname Optional
(for
XP24000/
XP20000,
XP12000/
XP10000/
SVS200,
XP1024/
XP128) Nickname of the host storage domain to delete
NOTE: You must specify either domain or domainnickname. Do not
specify both parameters at the same time, as this might cause an error to
occur.
model Required Model of the storage array for the host storage domain
port Optional The port ID of the host storage domain to be deleted
NOTE: Specify either port or portname. Do not specify both parameters
at the same time. This might cause an error to occur.
portname Optional Port name for the host storage domain to delete
NOTE: Specify either port or portname. Do not specify both parameters
at the same time. This might cause an error to occur.
serialnum Required Serial number of the storage array for the host storage domain
Command execution example:
hdvmcli DeleteHostStorageDomain -o "D:\logs\XP1024 DeleteHostStorageDomain.log"
"serialnum=10001" "model=XP1024" "port=16" "domain=1" "deletionoption=lusekeep"
Command execution result:
RESPONSE:
(Command completed; no data returned)
4-4-10 DeleteLogicalUnit
DeleteLogicalUnit deletes the logical unit and corresponding LDEV from the storage device
(see Table 4-23 ).
A user to whom a user-defined resource group is assigned and who has only View
permission cannot execute this command.
NOTE: For XP12000/XP10000/SVS200, logical units cannot be deleted for array groups with
chassis numbers from 65 to 96. Array groups with chassis numbers from 65 to 96 are indicated as
V-VOLs.
NOTE: For XP24000/XP20000, logical units cannot be deleted for array groups with chassis
numbers from 65 to 96, or from 16485 to 16516. Array groups with chassis numbers from 65 to
96, or from 16485 to 16516 are indicated as V-VOLs.