HP XP Command View Advanced Edition Software - Manual (Page 133)

Command line interface commands
133
sysVolFlag=0
externalVolume=0
differentialManagement=false
snapshotPoolID=-1
journalPoolID=1
thpType=-1
consumedCapacityInKB=-1
thpPoolID=-1
threshold=-1
tcaPoolID=-1
List of 1 PairedPool elements:
An instance of PairedPool
muNumber=0
pairedArrayType=Unknown
pairedSerialNumber=14053
pairedPoolID=1
.
. (repeated for other Pool instances)
.
***** : The value is encoded by the CLI.
4-4-17-16 GetStorageArray (subtarget=Port)
GetStorageArray (subtarget=Port) obtains the information about a port in one or all storage
subsystems (see parameters in
Table 4-46 ).
A user to whom a user-defined resource group is assigned can obtain information about one
or all ports in one or all storage subsystems that the user is permitted to access.
Table 4-46 GetStorageArray (subtarget=Port) command parameters
Parameter Name Status Description
model Optional Model of the storage subsystem
If you omit this parameter, all the storage subsystems become the target.
serialnum Optional Serial number of the storage subsystem
If you omit this parameter, all the storage subsystems become the target.
subtarget Required Specify Port.
port Optional Number of the port of the storage subsystem
Specify this parameter when you want to obtain information about a
specific port. If port and portname are omitted, information about all
ports is displayed. If you specify this parameter, you must also specify
the model and serialnum parameters.
If you specify the model and
serialnum parameters
NOTE: Do not specify port and portname at the same time, as this
might cause an error to occur.
portname Optional Port name for the storage subsystem
Specify this parameter when you want to obtain information about a
specific port. If port and portname are omitted, information about all
ports is displayed. If you specify this parameter, you must also specify
the model and serialnum parameters.
NOTE: Do not specify port and portname at the same time, as this
might cause an error to occur.