6-10 deletewwnforhoststoragedomain, Table 4-73 deletewwn command parameters, Y y y – HP XP Command View Advanced Edition Software User Manual
Page 183: Rt (see, Table 4-73
Command line interface commands
183
Table 4-73
DeleteWWN command parameters
Parameter Name
Status
Description
serialnum
Required
Serial number of the port's storage array
model
Required
Model of the port's storage array
port
Optional Port
number
NOTE:
Specify either port or portname. Do not specify both parameters
at the same time. This might cause an error to occur.
portname
Optional Port
name
NOTE:
Specify either port or portname. Do not specify both parameters
at the same time. This might cause an error to occur.
wwn
Required
WWN to be deleted from the port
Command execution example:
hdvmcli DeleteWWN -o "D:\logs\XP1024 DeleteWWN.log" "serialnum=10001"
"model=XP1024" "port=0" "wwn=11.22.33.22.44.55.33.11"
Command execution result:
RESPONSE:
(Command completed; no data returned)
4-6-10 DeleteWWNForHostStorageDomain
DeleteWWNForHostStorageDomain
removes security for LUNs that are under a specified
HostStorageDomain. The HostStorageDomain must already exist and be secured (see
).
A user who has only View permission cannot execute this command. A user to whom a user-defined
resource group is assigned, and who also has Modify permission, can execute this command for
any resources.
Table 4-74
DeleteWWNForHostStorageDomain command parameters
Parameter Name
Status
Description
serialnum
Required
Serial number of the storage array for the host storage domain
model
Required
Model of the storage array for the host storage domain
port
Optional
Port ID of the host storage domain
NOTE:
Specify either port or portname. Do not specify both
parameters at the same time. This might cause an error to occur.
portname
Optional
Port name of the host storage domain
NOTE:
Specify either port or portname. Do not specify both
parameters at the same time. This might cause an error to occur.
domain
Required
Domain ID of the host storage domain
This parameter can be specified in decimal and hexadecimal. If you
specify a hexadecimal number, add the 0x prefix.
NOTE:
The execution results are output in decimal.
NOTE:
You must specify either domain or domainnickname. Do not
specify both parameters at the same time, as this might cause an error to
occur.