6 lun commands, 6-1 addlun, Tion – HP XP Command View Advanced Edition Software User Manual
Page 168: Y y y

Command line interface commands
168
Table 4-64
ModifyLogicalGroup command parameters
Parameter Name Status
Description
parent
Optional
Object ID of the logical group under which the logical group is moved
This must be the valid ID of a group and the parent must either contain
only other groups or be empty. If you omit this parameter, the group's
parent is not modified.
NOTE:
Do not specify the parent and parentpath parameter at the
same time, as this might cause an error to occur.
parentpath
Optional
Path of the logical group under which the logical group is moved
NOTE:
Do not specify the parent and parentpath parameter at the
same time, as this might cause an error to occur.
Command execution example:
hdvmcli ModifyLogicalGroup -o "D:\logs\ModifyLogicalGroup.log" "objectid=*****"
"groupname=snow" "iconfile=group13.gif"
*****
: The value is encoded by the CLI.
Command execution result:
RESPONSE:
An instance of LogicalGroup
objectID=*****
name=snow
parentID=*****
logicalPath=root/snow
icon=group13.gif
capacity=0
capacityInKB=0
realCapacityInKB=0
percentUsed=0
numberOfLUNs=0
*****
: The values are encoded by the CLI.
4-6 LUN commands
The LUN commands can be used to manage LUN groups, set up WWNs, and set paths from a host
to a volume.
For further information on LUN operations, please see the HP StorageWorks XP Command View
Advanced Edition software Device Manager web client user guide.
4-6-1 AddLun
AddLun
sets paths from a host to a volume (see
). A LUN expanded (LUSE) logical unit
can be specified when the path is set.
A user who has only View permission cannot execute this command. A user to whom a user-defined
resource group is assigned and who also has Modify permission can specify the allowed LDEVs
only. If LDEVs that are not allowed are specified, an error occurs.
NOTE:
For XP24000/XP20000, XP12000/XP10000/SVS200, XP1024/XP128 series (in the XP
LUN Manager mode), when AddLun adds a LUN whose domain ID is not 0 to the host storage
domain, the XP LUN security of the target port is automatically enabled. Make sure that the I/Os
of the target port are stopped.