HP XP Command View Advanced Edition Software - Manual (Page 138)

Command line interface commands
138
Table 4-48 GetStorageArray (subtarget=ReplicationInfo) command parameters
Parameter Name Status Description
startElementNumF
ilter Optional Starting sequence number of performed replications for which information
is to be obtained
Specify this parameter when you want to obtain information for a part of
replications in a specific storage subsystem.
When replication information is ordered as shown below and numbered
from 0 upward, specify the first number in the sequence of replications
that you want to obtain.
Order of replications:
1 Serial numbers of P-VOLs in ascending order
2 Device numbers of P-VOLs in ascending order
3 Serial numbers of S-VOLs in ascending order
4 Device numbers of S-VOLs in ascending order
This parameter must be specified together with the
numOfElementsFilter
, model, and serialnum parameters.
numOfElementsFil
ter Optional Number of performed replications for which information is to be obtained
Specify this parameter when you want to obtain information for a part of
replications in a specific storage subsystem. Specify the number of
replications for which information is to be obtained. This parameter must
be specified together with the startElementNumFilter, model, and
serialnum
parameters.
The maximum recommended value is 16384.
Command execution example: In this example, the CLI command obtains information about the
replication performed by a storage subsystem (serial number: 10001, model: XP1024).
hdvmcli GetStorageArray -o "D:\logs\XP1024 GetStorageArray ReplicationInfo.log"
subtarget=ReplicationInfo model=XP1024 serialnum=10001
replicationsubinfo=LogicalUnit
Command execution result:
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 2 ReplicationInfo elements:
An instance of ReplicationInfo
objectID=*****
pvolSerialNumber=10001
pvolArrayType=XP1024
pvolDevNum=100
pvolObjectID=*****
pvolPoolID=-1
svolSerialNumber=10001
svolArrayType=XP1024
svolDevNum=101
svolObjectID=*****
svolPoolID=-1
replicationFunction=BusinessCopy
status=1
muNumber=0
copyTrackSize=15
splitTime=-1