HP XP Command View Advanced Edition Software - Manual (Page 78)

Command line interface commands
78
Table 4-20 AddVirtualVolume command parameters
Parameter Name Status Description
numoflus Optional Number of THP volumes
Specify the number of THP volumes to be created.
If this parameter is omitted, 1 is set.
devnum Optional Device number of the logical unit
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the LDKC
number, xx is the CU number, and yy is the LDEV number. ww is optional.
If ww is omitted, LDKC is assumed to be 0.
If this parameter is omitted, it is set automatically.
clprNumber Optional CLPR number
If this parameter is omitted, 0 is set.
NOTE: If you have specified the poolid parameter, the CLPR number of
the THP pool specific to that pool ID is set.
poolid Optional Pool ID of a THP pool
Specify the pool ID of the THP pool to which to assign the THP volumes to
be created.
threshold Optional Usage rate threshold for the THP volumes (%)
Specify a multiple of 5 from 5 to 300.
If omitted, 5 is set.
NOTE: If the poolid parameter is omitted, the specification for this
parameter becomes invalid.
capacitytype Optional Unit of the value specified in the capacity parameter
You can specify either KB or block.
If this parameter is omitted, KB is set.
Command execution example: In this example, the AddVirtualVolume command creates a
virtual volume group (arraygroupname: X200-1) that has two THP volumes (numoflus: 2) and
assigns the virtual volume group to a THP pool whose pool ID is 0 (poolid: 0) in the storage
subsystem (serialnum: 15065, model: XP24000). In addition, this command also sets the usage
rate threshold for the THP pool to 10% (threshold: 10).
hdvmcli AddVirtualVolume -o "D:\logs\XP24000\AddVirtualVolume.log"
model=XP24000 serialnum=15065 arraygroupname=X200-1 capacity=209715200
numoflus=2 devnum=00:30:00 poolid=0 threshold=10
Command execution result:
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 ArrayGroup elements:
An instance of ArrayGroup
objectID=*****
chassis=16,485
number=199
displayName=X200-1
raidType=-
emulation=OPEN-V