HP XP Command View Advanced Edition Software - Manual (Page 105)

Command line interface commands
105
Table 4-36 GetStorageArray (subtarget=Filter) command parameters
Parameter Name Status Description
model Optional Model of the storage subsystem
If you omit this parameter, you will obtain information about the models of
all storage subsystems.
serialnum Optional Serial number of the storage subsystem
If you omit this parameter, all the storage subsystems become the target.
subtarget Required Specify Filter.
objectid Required Object ID for a component (such as a path, port, or logical unit) of the
storage subsystem
Information is displayed about the storage subsystem for the component
identified by the object ID you specify with this parameter. Specify the
objectID obtained from another CLI response. The value is encoded by
the CLI.
Command execution example: In this example, the GetStorageArray (subtarget=Filter)
command obtains information about the storage subsystem for the logical unit (object ID: *****).
hdvmcli GetStorageArray -o "D:\logs\XP1024 GetStorageArray_Filter.log"
subtarget=Filter objectID=*****
***** : The value is encoded by the CLI.
Command execution result:
RESPONSE:
An instance of StorageArray
objectID=*****
[email protected]
description=xxxxx
serialNumber=10001
arrayFamily=XP1024/128
arrayType=XP1024
microcodeVersion=21-03-00/00
agentVersion=02-05-14
productName=1024
controllerVersion=21-04-00-00/00
numberOfControllers=4
capacityInGB=3,839
cacheInMB=10,240
sharedMemoryInMB=-1
numberOfSpareDrives=-1
freeCapacityInGB=2,329
allocatedCapacityInGB=1,505
autoLunCapacityInGB=4
onDemandCapacityInGB=0
totalFreeSpaceInGB=19
largestFreeSpaceInGB=3
capacityInKB=4,025,592,720
freeCapacityInKB=2,442,665,520
allocatedCapacityInKB=1,578,120,480
autoLunCapacityInKB=4,806,720
onDemandCapacityInKB=0
totalFreeSpaceInKB=20,192,256
largestFreeSpaceInKB=3,796,992
multipathSupport=1