HP XP Command View Advanced Edition Software - Manual (Page 167)

Command line interface commands
167
Command execution result 3:
RESPONSE:
An instance of LogicalGroup
objectID=*****
name=toro
parentID=*****
logicalPath=root/toro
icon=group12.gif
capacity=0
capacityInKB=0
realCapacityInKB=0
percentUsed=0
numberOfLUNs=0
.
. (repeated for other LogicalGroup instances)
.
***** : The values are encoded by the CLI.
4-5-7 ModifyLogicalGroup
ModifyLogicalGroup changes one or more characteristics of an existing logical group (see Table
4-64 ).
A user who has only View permission cannot execute this command. A user to whom a user-defined
resource group is assigned and who also has Modify permission can change the characteristics of
logical groups that the user is permitted to access.
Table 4-64 ModifyLogicalGroup command parameters
Parameter Name Status Description
objectid Optional Object ID of the logical group to be modified
NOTE: You must specify either objectid or logicalpath. Do not
specify both parameters at the same time, as this might cause an error to
occur.
logicalpath Optional Path of the logical group to modify
NOTE: You must specify either objectid or logicalpath. Do not
specify both parameters at the same time, as this might cause an error to
occur.
groupname Optional New name for the specified logical group
This must be either unique among groups within its parent, or if not
contained in another group, unique among top-level groups. If you omit
this parameter, the group name is not modified.
The number of characters that can be used for a group name is 1-64
bytes.
NOTE: Spaces at the beginning or end of a group name are not
registered.
NOTE: When web client is also used, follow the web client's specification
rule.
iconfile Optional Name of the icon file that visually represents the new logical group
If you omit this parameter, the group icon file is not modified.
For details about specifiable icon files, see Table 4-58 .