HP XP Command View Advanced Edition Software - Manual (Page 119)

Command line interface commands
119
productName=1024
vendor= HP
.
. (repeated for other LDEV instances)
.
***** : The values are encoded by the CLI.
4-4-17-11 GetStorageArray (subtarget=LogicalDKC)
GetStorageArray (subtarget=LogicalDKC) obtains the information about the logical DKC in
one or all storage subsystems (see parameters in Table 4-41 ).
Table 4-41 GetStorageArray (subtarget=LogicalDKC) command parameters
Parameter Name Status Description
subtarget Required Specify LogicalDKC.
model Optional Model of the storage subsystem
If you omit this parameter, all the storage subsystems become the target.
serialnum Optional Serial number of the storage subsystem
If you omit this parameter, all the storage subsystems become the target.
Command execution example: In this example, the CLI command obtains information about the
logical DKC in a storage subsystem (serial number: 12345, model: XP24000/XP20000).
hdvmcli GetStorageArray -o "D:\logs\GetStorageArray_LogicalDKC.log"
subtarget=LogicalDKC model= XP24000 serialnum=12345
Command execution result:
RESPONSE:
An instance of StorageArray
objectID=*****
name= XP24000 @10.208.115.221
description= XP24000 (12345) at 10.208.115.221
serialNumber=12345
arrayFamily=XP24K
arrayType= XP24000
microcodeVersion=60-00-32/00
agentVersion=05_00_00
productName=RAID600
controllerVersion=60-00-32-00/00
numberOfControllers=2
capacityInGB=8,852
cacheInMB=65,536
sharedMemoryInMB=-1
numberOfSpareDrives=-1
freeCapacityInGB=8,009
allocatedCapacityInGB=812
autoLunCapacityInGB=30
onDemandCapacityInGB=0
totalFreeSpaceInGB=3,089
largestFreeSpaceInGB=492
capacityInKB=9,282,994,926
freeCapacityInKB=8,399,083,870
allocatedCapacityInKB=851,452,736
autoLunCapacityInKB=32,458,320