HP XP Command View Advanced Edition Software - Manual (Page 244)

Command line interface commands
244
Table 4-117 Items output when instance is LDEV
Attribute Description
status LDEV status
One of the following values is output for XP12000/XP10000/SVS200 and
XP24000/XP20000:
•
Unknown : Unknown
•
Normal : Normal status
•
Normal (Quick Format) : Normal status (Quick Format)
•
Blocked : The LDEV is blocked.
•
Format : The LDEV is being formatted.
•
Correction Access : The access attribute is being modified.
•
Copying : Data is being copied.
•
ReadOnly : Read-only
•
Shredding : The LDEV is being shredded.
•
Preparing Quick Format : Quick Format is being prepared.
For other storage subsystems, Unknown is output.
NOTE: For all unformatted LDEVs, Blocked is output. Try formatting an LDEV to
determine whether it can be formatted.
thpType Volume type of XP Thin Provisioning Software
One of the following values is output for XP24000/XP20000:
•
0 : THP volume
•
1 : THP pool volume
•
-1 : Non-THP volume
•
-1 is output for other storage subsystems.
consumedSizeInKB Usage of the THP volume (KB)
One of the following values is output for XP24000/XP20000:
When the LDEV is a THP volume: Usage of the THP volume
NOTE: When the THP volume has not been assigned to a THP pool, 0 is
displayed. When the operator is the partitioned storage administrator, -1 is
displayed.
NOTE: The capacity of the THP volume is allocated from a THP pool in tens of
MB, so when the usage of the THP volume reaches 100%, the value of
consumedSizeInKB
might not be equal to the value of sizeInKB.
NOTE: This value might greatly increase depending on the combination of the file
system and the OS of a host that uses the THP volume. For details, see the THP
manual.
When the LDEV is not a THP volume: The same value as sizeInKB
-1 is output for other storage subsystems.