HP XP Command View Advanced Edition Software - Manual (Page 192)

Command line interface commands
192
•
Host LUN: 1
•
HBA WWN: 11.22.33.44.55.66.77.88
•
LUN size: 10MB
•
LUN in use: 10%
Command execution example:
hdvmcli AddHostInfo -o "D:\logs\XP1024 AddHostInfo.log" serialnum=10001
model=XP1024 hostname=MY_HOSTINFO_XP1024 ipaddress=172.16.64.159 mountpoint=C:
port=7 domain=0 devnum=2 osscsibus=0 osscsiid=15 oslun=1
portwwn=11.22.33.44.55.66.77.88 filetype=NTFS filename=C: size=10
percentused=10
Command execution result:
RESPONSE:
An instance of HostInfo
objectID=*****
name=MY_HOSTINFO_XP1024
serialNumber=10001
arrayType=XP1024
ipAddress=172.16.64.159
mountPoint=C:
portID=7
domainID=0
scsiID=15
lun=2
devNum=2
osScsiBus=0
osScsiID=15
osLun=1
portWWN=11.22.33.44.55.66.77.88
fileSystemType=NTFS
fileSystemName=C:
sizeInMB=10
percentUsed=10
lastUpdated=1039003476
***** : The value is encoded by the CLI.
4-7-3 AddHostRefresh
AddHostRefresh refreshes the information obtained from the Device Manager agent about the
hosts that the Device Manager manages (see Table 4-82 ).
A user who has only View permission cannot execute this command. A user to whom user-defined
resource groups are assigned and who also has Modify permission can specify the allowed hosts
only. If a host that is not allowed is specified, an error occurs.
NOTE: If the copy pair management host is unable to recognize a copy pair that was created on a
host that is not the copy pair management host, the copy status of that copy pair cannot be
refreshed even if the AddHostRefresh command is executed. In such a case, use the
AddStorageArray
command to refresh the storage subsystem containing the copy pair whose
status you want to update.