HP XP Command View Advanced Edition Software - Manual (Page 47)

Command line interface commands
47
Table 4-1 Extracting parameter values
To Find This
Parameter Value: Do This:
domain Execute the GetStorageArray (subtarget=HostStorageDomain)
command, specifying only the model and serialnum parameters, and
HostStorageDomain
for the subtarget parameter. Use the domainID
value.
domainnickname Obtain this value from the execution result of the GetStorageArray
(subtarget=HostStorageDomain) command. Execute this command by
specifying only the model and serialnum parameters, and
HostStorageDomain
for the subtarget parameter. In the execution result of
this command, the nickname value appears under An instance of
HostStorageDomain
. Use this value to specify the domainnickname
parameter.
groupelements Execute the GetStorageArray (subtarget=Port,
portsubinfo=Path)
command, specifying only the model and serialnum
parameters, Port for the subtarget parameter, and Path for the
portsubinfo
parameter. Use the objectID value. Specify the comma-
delimited objectIDs obtained from another CLI response.
The values are encoded by the CLI.
groupnum Execute the GetStorageArray (subtarget=ArrayGroup) command,
specifying only the model and serialnum parameters, and ArrayGroup for
the subtarget parameter. Use the number value.
hostname Obtain this value from the execution result of the GetHost command. In the
execution result of this command, the name value appears under An instance
of Host
. Use this name value to specify the hostname parameter.
logicalpath Obtain this value from the execution result of the GetLogicalGroup
command. In the execution result of this command, the logicalPath value
appears under An instance of LogicalGroup. Use this value to specify
the logicalpath parameter.
lun Execute the GetStorageArray (subtarget=HostStorageDomain,
hsdsubinfo=freelun)
command, specifying only the model and
serialnum parameters, HostStorageDomain for the subtarget parameter,
and freelun for the hsdsubinfo parameter. Use one of the lun values.
lungroupid Execute the GetStorageArray (subtarget=Port,
portsubinfo=LUNGroup)
command, specifying only the model and
serialnum parameters, and LUNGroup for the portsubinfo parameter. Use
the objectID value that appears under An instance of LUNGroup.
Specify the objectID obtained from another CLI response. The value is encoded
by the CLI.
lusedevnums Execute the GetStorageArray (subtarget=LDEV) command. Use the
devNum
value of the LDEV for which path=false and
onDemandDevice=false . Be sure that the LDEVs have the same
emulation , sizeInKB, and raidType attributes, specifying them in the form
of a comma-delimited list.
mastercontrollerid Execute the GetReplicationControllerPair command without specifying
any parameters, and then obtain the value from the execution result.
masterserialnum Execute the GetReplicationControllerPair command without specifying
any parameters, and then obtain the value from the execution result.
model Obtain these values from the execution result of the GetStorageArray
command. In the execution result, use the arrayType value or the
displayArrayType
value to specify the model parameter.