HP XP Command View Advanced Edition Software - Manual (Page 15)

About this guide
15
Table 1 Revisions
Date Edition Revision
Edition or Windows Server 2003 R2 x64 Edition, Device Manager CLI must
be used on the same machine as the Device Manager server.
•
Device Manager CLI now supports XP24000 as a new storage subsystem.
•
The message displayed when a memory shortage occurs in Device
Manager CLI has been changed.
•
In case of an occasion when the Device Manager database becomes
inconsistent due to the function of dividing a database operation into
transactions, the solution of this problem has been added to the explanation
of the command.
•
A note has been added for the case that information of the target
component is not output even if the GetStorageArray command is
executed with the subtarget parameter specified.
•
The GetStorageArray (subtarget=LogicalDKC) command, which
obtains the information about a logical DKC, has been added.
•
The method to obtain the pdevid parameter values in advance has been
changed.
•
The startElementNumFilter and numOfElementsFilter
parameters, which are used for obtaining partial information, have been
added.
•
Notes on specifying the domain, domainnickname, port, and portname
parameters have been added.
•
The recommended maximum configuration for using the AddLunScan
command has been added.
•
Along with the logical DKC support, the format of LDKC:CU:LDEV has
been added to the hexadecimal specification of the devnum parameter.
•
The following notes have been added to command explanations of the
command:
○
The capacity of the LDEV to be created will be larger than the specified
capacity.
○
The SSID must be obtained before an LDEV or LU is created.
•
The following note has been added to command explanations of the
command:
○
When a LUSE is created, formatted LDEVs must be specified.
•
Descriptions have been added that explain the values that can be specified
for the adaptermode parameter of the ModifyPortController
command.
•
Along with the logical DKC support, the format of LDKC:CU:LDEV has
been added to the hexadecimal specification of the pvoldevnum and
svoldevnum
parameters.
•
A description has been added, which shows that the pairoption
parameter can be specified only when XP12000/XP10000/SVS200 is being
used.
•
A description about XP24000 has been added to the explanation of the
chassis
, emulation, diskType, controllerID, slprNumber,
clprNumber , and cuInfo attributes of the ArrayGroup instance.
•
The following attributes have been added to the ArrayGroup instance:
○
openAllocatedActualCapacity
○
openUnallocatedCapacity
○
openUnallocatedActualCapacity
○
openReservedCapacity
○
openReservedActualCapacity