GW Instek PEL-3000 Series User Manual - Manual (Page 96)

PEL-3000 User Manual
94
Timing Diagram
for Single Step Below is a timing diagram of a single step in a
program.
On-Time Off-Time
Step test time
Start of Step End of Step
P/F End Test Time (fixed)
P/F Time 0.04s 0.06s
Short-Time
P/F Start Test Time (fixed)
Create a Program
Note
Before creating a program, the settings for each
step must first be created and saved to internal
memory (M001~M256). See the save recall chapter
for further details, page 119.
Program Setting
Display Overview
Chain
Previous
Menu
LOAD RS232 03/Sep/2012
Timing Edit for Program
On-Time:
Run:
Memory
0.1
Skip
M001
Short-Time:
P/F-Time:
Off-Time:
Off
Off
Off
STEP: 01
Program
Off
Recall
Default
Program
number
Step number in
selected program
Program
settings
PROG: 01
Program
settings
Operation 1. Press FUNC > Program[F1].
 Note that Program[F1] is off by default.
2. Select PROG and select a program number to
edit.