GW Instek PEL-3000 Series User Manual - Manual (Page 83)

OPERATION
81
Display
2.596
V
500.06
mA
1.2982
w
CV B Value 15.000
CV A Value 15.000
LOAD RS232
A Value
Fine
03/Sep/2012
V
V
OCP Alarm
Please Press Enter
To Clear Alarm
OCP
OCP indicator
Alarm message
when OCP is set
to Load Off
Mode
CV
I Range
L 0.7A
V Range
L 15V
Response
Fast
Configure
OPP
Description For OPP, the PEL-3000 can be configured to
either limit the power or turn off the load.
The OPP levels can be set to 10% higher than
the rating power.
Operation 1. Press Main > Configure[F5] > Protection[F1]
and set the OPP Level and OPP Setting.
Range: OPP Level: Rating power + 10%
OPP Setting: LIMIT, Load Off
Alarm  When OPP Setting is configured to Load Off, a
message will be displayed on the screen when
OPP is tripped. The Enter key must be pressed
to clear the alarm message.
 When configured to LIMIT, OPP will be
displayed on the screen when the OPP is tripped
and the power will be limited to the OPP Level
setting.