GW Instek PEL-3000 Series User Manual - Manual (Page 126)

PEL-3000 User Manual
124
Operation 1. Insert a USB drive into the USB port.
2. Press
Shift
+
File
FUNC .
3. Select USB with the Media[F1] soft-key.
4. Select the Data Type and choose the type of file
to save.
Data Type: Memory Data, Setup Data,
Preset Data, NSeq, FSeq
5. Select Save File and choose a save filename.
 Turn the scroll wheel to increase/decrease the
file number.
Memory:
Setup Memory:
Preset:
NSeq:
FSeq: Model_file number.M
Model_file number.S
Model_file number.P
Model_file number.N
Model_file number.F
6. Press Save[F3] to save.
 The file will be saved to the USB file path.
 Save Ok will be displayed when the save has
been completed.
 If saving-over an existing file you will be asked
to confirm the save. Press Save[F3] to confirm.
File Utilities Press File Utility[F5] to access the file utility. See
page 129 for details.
 Change the USB path.
 Rename files or create directories.