GW Instek PEL-3000 Series User Manual - Manual (Page 189)

APPENDIX
187
CC + CV Mode
Load Input
Voltage
Load Current
CV level
CC Current
Value
Note that when the source voltage is less than
the CV level, no current will flow due to a very
high impedance.
CR Mode
CR Mode When the unit is set to CR mode it will operate
as a constant resistance load when connected to
a constant voltage source. This means the unit
will maintain a set resistance, up to the rated
power, regardless of the input voltage. When
input voltage changes, the unit responds by
changing the current load to maintain the set
resistance according to ohm’s law. This is
illustrated below.
CR Mode
Load Input
Voltage
Load Current
CR Value