GW Instek PEL-3000 Series User Manual - Manual (Page 80)

PEL-3000 User Manual
78
Step Mode Configuration
Description When set to Step Mode, the voltage, current,
resistance and power settings can have the step
resolution configured. The step resolution
refers to the step resolution of the coarse
adjustment for these settings. The fine
adjustment cannot be configured.
See the Conventions section on page 41 for
details on how to switch between coarse and
fine adjustment modes.
Settings The step resolution of each setting is configured
separately for each current range.
Settings Description
CCH Step CC mode, IRange = High
CCM Step CC mode, IRange = Middle
CCL Step CC mode, IRange = Low
CRH Step CR mode, IRange = High
CRM Step CR mode, IRange = Middle
CRL Step CR mode, IRange = Low
CVH Step CV mode, VRange = High
CVL Step CV mode, VRange = Low
CPH Step CP mode, IRange = High
CPM Step CP mode, IRange = Middle
CPL Step CP mode, IRange = Low