GW Instek PEL-3000 Series User Manual - Manual (Page 58)

PEL-3000 User Manual
56
6. Set the voltage level parameters using the scroll
wheel and number pad.
 Set CV A Value and/or CV B Value.
 The maximum and minimum voltage levels
depend on the selected voltage range.
7. Set the remaining basic configuration settings
such as the response settings. See page 63 for
details.
Display
Mode
CV
I Range
H 35A
V Range
L 15V
Response
Slow
Configure
0.000
V
0.000
A
0.00
w
CV B Value 15.000
CV A Value 15.000
LOAD RS232
A Value
Fine
03/Sep/2012
V
V
Mode
Current range
Voltage range
Active setting
Current setting Voltage settings
Note
Basic CV mode configuration is complete. See
page 63 for more configuration options.
The current range and voltage range applies to all
the operating modes.
CP Mode
Description In Constant Power Mode, the unit will maintain
a constant power by varying the current. For
more details on CP mode, see the appendix on
page 188.