GW Instek PEL-3000 Series User Manual - Manual (Page 90)

PEL-3000 User Manual
88
Control Settings
Description The Knob Type setting determines if values are
updated immediately as they are edited or if
they are only updated after the Enter key is
pressed.
The Updated setting is applicable for when the
load is already on and the user wishes to
change the set values (current, voltage, etc.) in
realtime.
The Old setting will only update the values
after the Enter key is pressed.
Operation 1. Press
Shift
+
Utility
Help > Other[F5].
2. Set the Knob type and Slave knob settings.
Range: Knob type: Updated, Old
Language Settings
Description The PEL-3000 supports only English.
Operation 1. Press
Shift
+
Utility
Help > Other[F5].
2. Set the Language setting.
Supported languages: English